Do you need an alignment with new tires?

Getting alignment after buying new tires helps ensure your tires perform their best, last longer, and keep you safely on the straight and narrow. Should you get an alignment with new tires in Overland Park, KS? Yes!

How much do four new tires cost?

If you're looking to replace all four tires on your car, you can expect to spend anywhere from $350 to $1,000. These tire prices vary depending on the size of the tire, the type of tire, and the brand. For exact cost, it's best to do your own research or speak to one of our tire specialists. Call American Fusion Wheels today to learn more about replacing tires in Overland Park, KS.

How often should you rotate your tires?

When it comes to properly maintaining tires in Overland Park, KS, we've found that they should be rotated every 5,000 to 7,500 miles. For both front-wheel drive (FWD) and rear-wheel drive (RWD) vehicles, our experts would recommend that a tire rotation be performed every 5,000 to 7,500 miles, but exactly how you should rotate your tires depends on your drivetrain.

Where should I buy new tires?

American Fusion Wheels is a great place to buy wheels and tires in Overland Park, KS. We have the largest showroom floor of wheels and tires in the Overland Park and Shawnee area. We serve local areas by offering a large selection of tire brands, tire sizes, and types of tires for sale. Our service team is top-notch and knowledgeable about tires and wheels, from regular brand tires and wheels to custom tires and wheels.

CV Drive Shaft | Front | Jeep Gladiator JT/Wrangler JL 4WD (2018-2024)

$698.95

In Stock Pre order Out of stock

Description
Shipping Policy
Return Policy

Description

Get the most out of your Jeep with Rough Country's Front CV Driveshaft! On any JL or JT lifted 3.5in or more the factory driveshaft will incur damage if the suspension is flexed to full droop. Rough Country's upgraded Jeep Wrangler JL Rubicon and Gladiator JT?áFront CV Driveshaft corrects this issue and promotes the proper geometry in all on and off-road scenarios!

Features:

Collapsed Measurment: 36 3/8 inches Extended Measurment: 39 1/2 inches Eliminates factory driveshaft damage at full droop Works on Dana 44 axles ONLY Includes better quality CV joints

Shaft strength is twice as strong as the factory equipped drive shaft

Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the botom of your Jeep

Notes:

An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep lift kit 3.5?ǥ or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. This product fits JL Rubicon Models Only This product does NOT fit JL Non-Rubicon Models This product fits JT Gladiator Rubicon and Non-Rubicon Models Recommended on models with 3.5in or more of lift.

Download Instructions Sheet

Shipping Policy

Shipping:

We do not ship outside USA Main land.

Free Local Pickup:

12310 W 62nd Ter Shawnee, Kansas 66216

Return Policy

30 days return with the original packaging & undamaged condition, buyers are responsible for every shipping cost.

CV Drive Shaft | Front | Jeep Gladiator JT/Wrangler JL 4WD (2018-2024)

Download Instructions Sheet

Get In Touch

Get In Touch

Shop Info

Shop Info

Helpful Links

Helpful Links

Newsletter Sign Up

Newsletter Sign Up